Follow Us:
+62 21 6124030
DS57U
 
 
Shuttle Slim-PC Barebone DS57U
Fanless Slim PC with Celeron processor for numerous applications
The DS57U is a fanless slim PC with a robust 1.3 litre metal chassis and exceptional connectivity: HDMI, DisplayPort, Dual Intel LAN, USB 3.0/2.0, serial ports, audio, card reader and W-LAN. Installation of components goes straight forward, as there is plenty of interior space for two memory modules, a 2.5" drive and a mSATA module. The built-in Dual Core Intel Celeron processor with integrated HD graphics provides ample performance for fluent playbackof video at 1080p Full HD quality. Thanks to its re-designed passive cooling architecture, the system is virtually maintenance-free and isapproved for 24/7 nonstop operation. It is big on performance, yet extremely energy-efficient. The Shuttle Slim-PC Barebone DS57U is an ideal platform for professional applications such as digital signage, POS, Kiosk, Thin Client, Cloud Computing, Office PC and Multimedia.

 

  • Fanless and Silent
    Passive cooling, no fan noise at all
    Perfect to be used in noise-sensitive environments
    Fanless, dust-free and thus virtually maintenance-free
  • Low Power Consumption
    Power consumption: idle: 12.5 W, full load: 17 / 26.5 W (without/with graphics)
    (measured with 2x 2GB SO-DIMM, 60 GB 2.5" SSD)
  • 24/7 Nonstop Operation
    This device is approved for 24/7 permanent operation.
    Requirements:
    - Free circulation of air amongst the PC must be guaranteed.
    - Ventilation holes must stay clear.
    - If a hard disk is installed, this must also be approved for permanent operation by its manufacturer
  • Chassis
    Slim-PC (Nettop) with black chassis made of steel
    Without cooling fan, passive cooling only
    The bays for memory, 2.5" drives and Mini-PCIe cards
    can be easily accessed by removing two cover plates.
    Dimensions: 200 x 165 x 39.5 mm (LWH) = 1.3 litres
    Weight: 1.43 kg net and 2.13 kg gross
    Two holes for Kensington Lock and numerous 
    threaded holes (M3) at both sides of the chassis
  • Operation Position
    1) Device must only be used in vertical position with the DisplayPort port facing up
    2) Please make sure to use either the supplied feet or the VESA mount
  • Operation System
    This barebone system comes without operating system.
    It is compatible with Windows 8, Windows 7 and Linux [8]
    Supports 32- and 64-bit.
  • Processor
    Model: Intel Celeron 3205U (ULV)
    System-on-a-chip architecture (SoC): no chipset required
    Code name: Broadwell (5th Generation Intel Core)
    Cores / Threads: 2 / 2
    Clock rate: 1.5 GHz
    L1/L2/L3 Cache: 128 kB / 512 kB / 2048 kB
    Memory controller: DDR3L-1600 Dual Channel (1.35V)
    TDP wattage: 15 W maximum
    Manufacturing process: 14 nm
    Maximum Tjunction Temperature: 105°C
    Integrated Intel HD graphics engine
    Supports 64 Bit, VT-x, VT-d, Enhanced SpeedStep, NX bit, SSE 4.1/4.2
  • Integrated Graphics
    Intel HD graphics
    Two digital audio/video ports: DisplayPort 1.2 [7] and HDMI 1.4a
    Clock rate: 300~800 MHz
    Maximum resolution: 2560 x 1600
    Execution Units (EU): 12
    Supports two independent screens
    Supports DirectX 11.2, OpenCL 1.3/2.0, OpenGL 4.3
    Supports DisplayPort 1.2, HDMI 1.4a
    Supports full AVC/VC1/MPEG2 hardware decoding
    Supports HD video plus multi-channel digital audio via a single cable
    Dynamic, shared memory: up to 1632 MB
  • Mainboard / BIOS
    Shuttle Mainboard FS57
    All capacitors are high quality solid capacitors
    Supports resume after power failure [6]
    Supports Wake on LAN (WOL)
    Supports Power on by RTC Alarm
    Supports boot from USB devices and SD card reader
    AMI BIOS in 8 MByte EEPROM with SPI interface
    Supports hardware monitoring and watch dog function
    Supports Unified Extensible Firmware Interface (UEFI)
    The firmware supports two boot modes: Legacy BIOS and UEFI
  • Power Adapter
    External 65 W power adapter (fanless)
    Input: 100~240 V AC, 50/60 Hz, max. 1.6 A
    Output: 19 V DC, max. 3.42 A, max. 65 W
    DC Connector: 5.5/2.5mm (outer/inner diameter)
  • Memory support
    2x SO-DIMM slots with 204 pins
    Supports DDR3L-1333 (PC3-10600) and DDR3L-1600 (PC3-12800) SDRAM at 1.35V
    Supports Dual Channel mode
    Supports a maximum of 8 GB per DIMM,  maximum total size: 16 GB
    Supports two unbuffered DIMM modules (no ECC)
    Caution: This mainboard does only support 1.35V DDR3L memory modules.
    Note: DDR3L has a lower operation voltage compared to DDR3
  • Mini PCIe Slots
    Two Mini PCI Express expansion slots: full size and half size
    1) the half size slot is occupied by a WLAN module
    2) the full size slot supports PCIe 2.0, SATA 3G and USB 2.0
    and can either be used for a Mini-PCIe card or
    for a Mini SATA (mSATA) flash memory card [3]
    Please use the "Mini-PCIE / mSATA Select" function in the BIOS setup.
  • Audio
    Audio Realtek® ALC 662 High-Definition Audio
    Two analog audio connectors (3.5mm) at the back panel: 
    1) 2 channel line out (head phone)
    2) microphone input
    Digital multi-channel audio output: via HDMI and DisplayPort
  • Dual Gigabit LAN
    Dual network with two RJ45 ports
    Used network chips:
    1) Intel i211 Ethernet Controller with MAC, PHY and PCIe interface
    2) Intel i218LM PHY connected to the MAC of the processor
    Supports 10 / 100 / 1.000 MBit/s operation
    Supports WAKE ON LAN (WOL)
    Supports network boot by Preboot eXecution Environment (PXE)
  • Wireless Network (WLAN)
    Built-in Mini-PCIe WLAN card (half size) and internal antenna
    Single-Chip 1T1R WLAN Controller Realtek RTL8188EE
    Supports IEEE 802.11b/g/n, max. 150Mbps up-/downstream
    Security: WPA/WPA2(-PSK), WEP 64/128bit, IEEE 802.11x/i
  • 2.5" Drive Bay
    Supports one Serial ATA hard disk
    or one SATA SSD drive in 6.35cm/2.5" format
    Device height: 9.5 or 12.5 mm (max.)
    Supports Serial-ATA III, 6 Gb/s (600 MB/s) bandwidth
    Supports Unified Extensible Firmware Interface (UEFI)
    Note: no Serial ATA cable is required
  • Card Reader
    Integrated SD card reader 
    Supports SD, SDHC and SDXC memory flash cards
    Supports booting from SD card
  • Front Panel connectors
    4x USB 2.0
    2x RS232 serial ports (5V/12V, 1x switchable to RS422 / RS485) [1]
    covered with black plastic caps
    SD card reader (supports SD, SDHC, SDXC)
    Power button
    Power LED (blue)
    HDD LED (yellow)
  • Back Panel connectors
    DisplayPort 1.2 [7]
    HDMI 1.4a
    2x USB 3.0
    2x Gigabit LAN (RJ45)
    Microphone input
    Audio Line-out (headphone)
    DC-input connector for external power adapter
    4-pin connector "SW2" (2.54 mm pitch) for power button, Clear CMOS and 5V DC [4]
    Perforation for optional Wireless LAN antennas (2 holes)
  • Onboard connector
    EDP1 - Embedded DisplayPort (eDP, 2x15 pin) [2]
  • Always-On Jumper
    By removing Jumper J7 (please refer to the quick user guide)
    the system will start unconditionally once power is applied. [6]
  • Scope of Delivery
    Multi-language user guide
    Two metal feet with four screws M3 x 7
    VESA mount for 75/100mm standard (two metal brackets)
    Four thumbscrews M3 x 5 mm (screws together VESA mount and PC)
    Four screws M4 x 10 mm (to fix the VESA mount to the external surface)
    Rack (to mount a 2.5" storage in the bay) with three screws M3 x 4 mm
    Driver DVD (Windows 8.1 / 8 / 7 for 32- / 64-bit)
    External power adapter with power cord
  • Environmental Specifications
    Operating temperature range: 0~40 °C [5]
    Relative humidity, non-condensing: 10~90%
  • Conformity/Certifications
    EMI: FCC, CE, BSMI, C-Tick
    Safety: CB, BSMI, ETL
    This device is classed as a technical information
    equipment (ITE) in class B and is intended for use in 
    living room and office. The CE-mark approves the 
    conformity by the EU-guidelines:
    - EMV-guideline 89/336/EWG electromagnetic tolerance
    - LVD-guideline 73/23/EWG use of electric devices 
    within certain voltage-limits